How to Use Table Saw for Different Types of Wood Cutting Techniques

Want create site? Find Free WordPress Themes and plugins.

A table saw is a kind of woodworking tool that is easy to use and can carry a lot of stuff within a few seconds. You can use this tool for long vertical cuts or short angle crosscuts. Some simple tips and techniques for handling the saw will increase your productivity and versatility with precision. In this article, we are going to introduce some tips and techniques on how you can use the table saw to get more benefits. You can also visit for more details about woodworking tools and techniques.

To make precise and accurate cuts, what you need is to follow the right techniques for the right jobs. For that, you have to learn some kind of cuts that a table saw can produce. Here are some cutting styles you will love, which the most professional woodworkers follow at their DIY workshop.

The accurate and precise cuts a table saw produces

A table saw produces versatile cutting styles including dado, rabbet, rip cuts, cross cuts, and miter cuts which will reduce your time and effort. Let’s have a look at them how they work.

How to Use Table Saw for Different Types of Wood Cutting TechniquesRip Cuts

When it comes the name of the table saw, you’ll find that the most common cut is rip cut. The rip cut is a kind of cut that cuts the wood parallel to the grain. Unlike cross-cuts, it uses the saw parallel to the grain. So, it divides the wood at a straight line.

Before you start a rip cut, make sure you did some practice with some piece of wood so that you feel the sudden pressure for the original cuts.

To make a rip cut, what you need is to adjust the blade carefully on the table measuring the thickness of the wood so that no kickback arises.

Then you need to adjust the width of the fence also. You can tighten or loosen the side rail so you can move the wood left or right for accurate adjustment, and hold tight when sawing. You can use pushing tools to push the wood for extra-protection and precise cuts.

Table saw is one of the loudest tools in the workshop; so it’s vital to ensure your eye protection and hearing protection at first.

Bevel Ripping

Before you make a bevel ripping, it’s noteworthy to learn about tilting system of your table saw. You will observe that some of the table saws tilt left while some other right. When you’ll go for bevel ripping, make sure the tilting right or left of your saw so you can fix it for accurate cuts.

A table saw enables bevels and chamfering from 15° angle to the 90° angle. Accurate position and strong tilting will ease your way to make accurate bevels. If the table saw tilts left at 40° angle, you’ll definitely place your saw in the right side to cut the bevel.

At the beginning what you’ll need is to fix the tilt in the angle of your saw. Then place your wood piece on the table top beside the saw blade and take an accurate measurement and fix it. Don’t be hurry! Place pushing tools on the wood to push over the saw blade keeping it touching the work fence. Slowly push the wood over the saw blade and this will be a nice piece of bevel cut.

If you find your chisel edge useless for certain jobs, bevel angle is nice to fit for you then. You can use finer angles for soft operations, but for hardwoods, you can use steeper angle no doubt.


Some custom jigs will enhance the potential of your table saw. When you use your table saw for rip cut, it simply divides the wood piece into two parts. But for crosscuts, it’s a quite complex process because you cannot keep the wood piece rigid in one place while cutting. This is because the crosscut sled is vital for cutting crosscuts. The crosscut sled will provide you a platform that more stable and you can make a straight and square cut on it.

First of all, you need to adjust the saw blade a bit above the thickness of the wood piece. But make sure it’s not too high or too low so that it can accomplish the full length of cutting the wood.

To ensure the accuracy of the crosscut, you need to install the miter gauge into the slot. You can set the separated one into the slot if you miss the built-in meter gauge. You can collect this from any of a hardware store.

Perfect measurement is a vital part of the crosscut. To make a perfect crosscut, you must install the meter gauge in a squared position on the saw blade. For that, you have to place it at a 45° angle and create a triangle. Ensure the triangle ends up to the 90° angle. Then fix it strong so that it can’t move right or left.

The most important thing is that the miter gauge fence must be attached and need to hold the board against the fence so that the wood piece can move and create the accurate cut in a straight line. Make sure the hand you use to hold the fence is far away for the saw blade. Otherwise, it may be the reason for causing an accident in the workshop.

Finally when the crosscut finishes, pull back the board so that the saw blade becomes loose to easy access. Then turn off the saw to finish your crosscuts.


When you need a precise fitting with two or more pieces of woods together, Dado will come for your assistance. You can use the dado cuts for making furniture, cabinets or at any other woodworking projects.

A kind of especial saw blade is best fit for Dado cuts. So, it will be wise to choose a table saw finding this especial blade included.

Final Verdict

These are the most common and vital cutting techniques. If you practice them on a regular basis, you’ll be a skilled DIYer and be able to handle the table saw for cutting woods the way you like.

Did you find apk for android? You can find new Free Android Games and apps.

We will be happy to hear your thoughts

      Leave a reply